15
14. Side Burner Installation
a) From underneath the side burner remove
two screws which are assembled on the
bottom of the side burner shelf (D). Open
side burner lid and place the Side Tube
Burner (U) through the opening. Place the
Side Tube Burner (U) tube over the side
burner gas valve and make sure Side Burner
gas valve is inserted into side burner tube.
As shown in Fig.18.
b) Then with two screws secure the side burner
from underneath to the Side Burner Shelf (D).
As shown in Fig.18.
c) Connect ignition wire from Firebox Assembly (A)
control panel to the side burner igniter pin from
underneath the Side Burner Shelf & Control Panel (D).
As shown in Fig. 18.
Note:
After completing side burner installation,
make sure here is no more than a 3 mm gap
between igniter pin and burner. As shown in Fig.19.
15. Electronic Igniter Battery Installation
Unscrew the electronic igniter button
and place the battery (V) into the housing
with the positive terminal (+) facing
outward. Replace the ignition button
after the battery has been installed
as shown in Fig. 20.
R
100
200
300
400
500
600
700
800
Fig. 18
Fig. 20
U
D
Fig. 19
Side burner
lgniter wire
Side burner
3mm
800
700
600
500
400
300
200
100
R
V
