Grill'D Aurora, Инструкция по установке и эксплуатации, Страница: 43 / 90

43
3.1.1. Configu r ation of sauna v entil a tio n
1) Self-ventilation (Figure 1):
Air inlet (A) shall be located close to the floor next to the heater. Air inlet is necessary for
fresh air supply to the sauna.
Exhaust outlet (B) shall be located under the ceiling as far as possible from the heater. The
primary purpose of exhaust outlet is to remove moisture from the sauna after steam bathing.
2) Mechanical exhaust ventilation (Figure 2):
Air inlet (A) shall be located at the height of about 500 mm over the stone heater.
Exhaust outlet (B) shall be located as close as possible to the floor, for example, under a bench.
А
�
50-100
Естественная вентиляция
B
Естественная вентиляция
B
50
0
А
�
50-100
А
�
50-100
Естественная вентиляция
B
Естественная вентиляция
B
50
0
А
�
50-100
B
А ɸ 50-100
Figure 1.
Self-ventilation
А
�
50-100
Естественная вентиляция
B
Естественная вентиляция
B
50
0
А
�
50-100
А
�
50-100
Естественная вентиляция
B
Естественная вентиляция
B
50
0
А
�
50-100
B
А ɸ 50-100
500
Figure 2
.
Mechanical
exhaust
ventilation