12
Side Burner Assembly
Was
Insert the Orifice into the Side Burner Tube.
Attach the Side Burner Gas Valve to Side Shelf
Left. Secure firmly using 2 of M4 x 10mm Phillips
Head Screws (Attached on Side Burner Gas Valve).
Attach the Side Burner Electrode Wire to the
Control Valve.See
Figure 10,11.
Install the Lid Knob using 1 of 3/16" x 3/8" Phillips
Head Screw (attaches on Lid Knob).See
Figure
10.
Attach the chrome color Control Knob Seat and
Spring onto the Gas Valve stem. Then, carefully
attach the Control Knob so the "OFF" position
faces upward - toward you. Do not force the Control
Knob onto the stem. See
Figure 12.
Place the LPG Regulator inside the cart through
the opening above Cart Side Panel. Press the hose
of the LPG Regulator into the Hose Holder above
Cart Side Panel. Secure firmly using 2 of 3/16"
x 3/8" Phillips Head Screw and 3/16" Nut. See
Figure 13.
3/16" x 3/8" Phillips Head Screw x 1
Figure 10
Figure 11
Figure 12
The location of the Burner Tube with respect to
the Orifice is vital for safe operation. Check to
ensure the Orifice is inside of the Burner Tube
as shown below, before using your gas grill. If
the Burner Tube does not fit over the Valve
Orifice, lighting the Burner may cause an explo-
sion and/or fire.
Figure 3A
WARNING
!
ORIFICE
GAS VALVE
Burner Tube
Figure 13
18.
19.
20.
21.
LID KNOB
SIDE BURNER
GAS VALVE
SIDE BURNER
GAS VALVE
ORIFICE
SIDE BURNER
TUBE
ELECTRODE
WIRE
CONTROL
KNOB
SPRING
CONTROL
KNOB SEAT
HOSE
LPG REGULA-
TOR
HOSE HOLDER
CART SIDE
PANEL
3/16" Lock Nut x 2
3/16" x 3/8"
Phillips Head Screw
x 2
