Step 2
–
Take the main post (E) and screw in the center
stand tightly to the leg assembly (f), loose main post may
also result in the cart being unstable (see Figure 3).
Step 5
–
Felt pads are placed on the mount to protect the
mixer. Stick the felt pads on the mount before placing your
mixer. (see Figure 7)
Step 1
- Locate the leg assembly (F) and open the legs
then screw in the 4 casters and tighten using a wrench
as seen on Figure 1 & Figure 2.
Make sure to not over tighten and all casters are
leveled. Uneven casters may result in the cart being
wobbly and/or unstable. Please note that two of the
casters have locking wheels (G). These are the casters
with the tab. These should be screwed into opposing
legs. The wheels are locked by pushing down on the
tab. (NOTE: Failure to unlock the wheels before moving
the stand can damage the casters and the braking
mechanism.) Make sure to screw the casters all the
way in. If the stand is not sitting level after attaching
the casters, unscrew one (or two) of the casters on the
side of the stand which is leaning to and screw back
again the casters to raise that side of the stand.
Step 3
–
Take the chrome center piece (I) that goes in
the main post, pull the locking pin (J) and insert the
chrome center piece. Make sure that the holes in the
chrome post align with the locking pin, turn the locking
pin (you will hear a click sound) to lock it in place. For
additional security of the product tighten the knob (J) on
the main post (see Figure 4).
Step 4
–
At the top of the chrome center piece another
locking pin (L) is located pull and place the top mount (A).
Insert the knob nut (D) and the knob handle (C) on the
other side then adjust to your preferred angle and
tighten. Once you reach your preferred angle turn the
locking pin to secure the angle. (see Figure 5 & Figure 6).
Please scan the QR Code below for the product
demonstration video. Or go to the URl shown here and find
the product video. www.Griffin-Stands.com/Videos
