Please read and understand instructions before attempting installation
STANDARD GRIFCO WARRANTY CONDITIONS APPLY TO ALL PRODUCTS
2
MinEB layout
1 – Output relay terminal pins
2 – Trigger input terminal pins
3 – Dipswitches
4 – Cable socket
5 & 6 – Mounting holes
7 – Terminal blocks for terminal pins
Installation
Installing the MinEB
Installation of the MinEB is as follows:
•
Turn off power to the Maestro operator via isolator or breaker
•
Remove Maestro lid exposing the main circuit board
(MCB)
•
Plug the free end of the MinEB cable into the
EXPANSION socket on the MCB as shown
•
Mount the MinEB to the MCB with the support posts
supplied into the mounting holes (on earlier models
of the Maestro, alternative mounting may be
required)
•
Adjust dipswitches to suit intended use
•
Replace the lid and resume power to the operator
NOTE: MAKE SURE YOU HAVE READ THIS MANUAL AND UNDERSTAND THE FUNCTIONS
OF THE UNIT BEFORE POWERING UP WITH ANY PERIPHERAL DEVICES INSTALLED.
POWERING UP WITH INCORRECT SETTINGS MAY CAUSE UNEXPECTED BEHAVIOUR
On the initial power up, the MinEB will light up signifying connection with the operator.
