BASIC OPERATION - F4
REV E
–03/01/2017 13:38:00
Page 1 of 6
W:\Electrical\INSTRUCT\INSTRUMENT\WATLOW\F4\OBS\BASIC OPERATION - F4 REV E.doc
WATLOW F4 KEYS
A.
BASIC OPERATION
1.
If you ever reach a point on the controller where you do not want to be, press
repeatedly to return to the
Main Page
.
2.
If prompted to “Save changes or restore values?”, press to save any
changes made or press to discard the changes.
3.
If the Profile Indicator Light is on, a profile is running. If it is off, no profile is
running.
B.
STATIC SET POINT OPERATION
1.
Press
or until cursor is next to
SP1
on lower display.
2.
Press
to enter
SP1.
3.
Press
or to change set point.
4.
Press
to accept change.
PROFILE KEY
(PROFILE RUN/HOLD)
LEFT AND RIGHT
ARROW KEYS
(BACK OUT AND NEXT)
PROFILE INDICATOR LIGHT
(RUN/HOLD STATUS)
UP AND DOWN ARROW KEYS
(MOVE UP/INCREASE AND
MOVE DOWN/DECREASE)
ACTIVE OUTPUT
INDICATOR LIGHTS
ALARM OUTPUT
INDICATOR LIGHTS
