GridSense Powermonic PM35, Руководство пользователя

Страница: 10 / 13

Configuring PowerMonic Remote Communications page 9
Next, connect the cross-over Ethernet cable from the CommsModule to users’ PC.
Windows XP
To establish the Ethernet connection to Comms Module, click on
Start Control
→
Panel Network
→
Connection . Right click on Local Area Connection and
select Properties. Select Internet Protocol (TCP/IP) and click on Properties .
Under the General tab, select the option Use the Following Address and change
PC’s IP address to
10.10.20.123 and Subnet Mask to 255.255.0.0 . The user
must have administrative rights to modify or establish network connection.
Windows 7
To establish the Ethernet connection to Comms Module, click Start
→
Control
Panel
→
Network and Sharing Center
→
Local Area Connection
→
Properties
→
Select Internet Protocol Version 4 (TCP/IPv4)
→
Click
Use the
following IP address
. Use the following address: IP address
10.10.20.123
and
Subnet Mask 255.255.0.0 . The user must have administrative rights to modify
or establish network connection.
Figure 8: Establishing Ethernet connection