Q:
Can I use the Gridmesh Anchor (GMA)
for rope access applications?
A:
Yes it is possible to use the GMA for rope access
applications, though the code of practice for rope access
(e.g. ICOP for IRATA) will likely require you to use two
devices as separate anchorage points for one person. As
the strength of the GMA is high enough for limited-free-fall
or suspension type work, it has adequate strength.
Q:
Can I use the Gridmesh Anchor (GMA)
for hauling loads?
A:
The GMA is designed as a personal fall protection
device and is not designed for hauling large loads. As it
can be used for suspension work, technically light loads
(ie no greater than 100kg) can be hauled into place in
isolation. In other words, do not use the same Gridmesh
anchor as a personal fall arrest anchor as well as a materials
hauling system. A separate anchor device should be used
provided these load limits are not exceeded.
Q:
Why does the Gridmesh Anchor sling test
certificate have a proof load rating of 11kg
when I thought it was rated to 22kN?
A:
The GMA components have been tested to consistently
pass the 22kN performance rating, however it is common
practice to proof-load a sling to 50% of its rated strength.
For this reason every sling provided is supplied with a test
certificate demonstrating that the device has been proof-
loaded in this way, providing confidence that the swaging
process has been successful.
Q:
Will the company be launching a materials
handling version of the Gridmesh Anchor?
A:
The company is working on releasing a dedicated
materials handling version of this product in the future. For
now, the existing models can only be used as a personal
fall arrest device, for suspension (rope access or bosun’s
chair work) and to haul very light loads (No more than
100kg) into position.
Q:
Does the Gridmesh Anchor come in
different sizes?
A:
At the present time there is only one size available. This
device enables an anchor to be set over grid mesh with the
floor sub-structure set at a maximum of 1200mm centres.
The device can also be used where the steel floor joists are
less distance apart (say 900mm). This can be achieved by
orienting the device in a diagonal position that still allows
the feet of the GMA to remain positioned directly over the
supporting sub-structure. Future models may be provided
in alternative sizes if sufficient demand exists.
GRIDMESH ANCHOR
7
Q:
Can I access extra accessories than the ones
already provided in the kit?
A:
Additional components such as taglines, wire slings,
bags can all be purchased separately as required. In the
event one component is unsuitable for future use (e.g,
fails inspection) or additional accessories are required for
your application, the replacement parts can simply be
purchased through your preferred distributor.
Q:
Where can I order the Gridmesh Anchor?
A:
The Gridmesh anchor company has chosen to sell its
products through a distribution network to enable the
products to be correctly supported in the field and assist to
rectify issues in the unlikely event there are any problems
with the product on the ground. It also enables the product
to be pre-inspected prior to being entered into service.
Contact the company to determine if your preferred
distributor is an existing stockist, or we can arrange for the
establishment of your chosen safety provider to access the
product on your behalf
Q:
How often do I need to inspect the
Gridmesh Anchor?
A:
Like any fall protection product, the GMA needs
periodic inspection. The following schedule is
recommended for inspection:
• Before first use - inspection by a competent person (also
record date of first use in the log book);
• Before each use - by the user;
• 6 monthly by a competent person, with details also
recorded in a logbook.
The GMA wire sling and beam carry separate serial
numbers - we recommend you use the beam serial number
as the kit serial number if this is required to be recorded.
Detailed inspection requirements are located in the user
instruction manual which can be downloaded from the
website in the event it becomes lost/separated from the kit
that has initially been supplied.
Q:
Does the Gridmesh Anchor have a lifespan?
A:
The Gridmesh Anchor carries a limited lifetime warranty
(see the technical section on the website or the user
instruction manual for further details). Generally, the
product should last a minimum of 10 years, though items
such as slings and taglines can be replaced if they wear
down with use. The Gridmesh anchor can continued to be
used indefinitely until such time as it fails an inspection.
If any component of the GMA is found to be damaged, it
should be tagged out of service immediately and not used.
Frequently asked questions
WARRANTY
The Gridmesh Anchor has a
limited lifetime warranty.
Please visit our website for the
full detailed warranty at:
