Greyhound 96156 Скачать руководство пользователя страница 5

Page 5

For technical questions, please call 1-800-444-3353.

SKU 96156 
        

This product contains or, when used, 

16. 

produces a chemical known to the State 
of California to cause cancer and birth 
defects or other reproductive harm.  
(California Health & Safety Code § 
25249.5, 

et seq.

)

When spills of fuel or oil occur, they must 

17. 

be cleaned up immediately.  Dispose 

of fluids and cleaning materials as per 

any local, state, or federal codes and 
regulations.  Store oil rags in a bottom-
ventilated, covered, metal container.

Keep hands and feet away from moving 

18. 

parts.  Do not reach over or across 
engine while operating.

Before use, check for misalignment 

19. 

or binding of moving parts, breakage 
of parts, and any other condition that 
may affect the engine’s operation.  

If 

damaged, have the engine serviced 
before using.

  Many accidents are 

caused by poorly maintained engines.

Use the correct engine for the 

20. 

application.  Do not modify the engine 
and do not use the engine for a purpose 
for which it is not intended.  Install on 
Lawn mower only.

Follow lawn mower manufacturer’s 

21. 

operation precautions.

servIce PrecautIons

Before service, maintenance, or 

1. 

cleaning:

close the engine’s fuel valve.

a. 

allow the engine to completely cool.

b. 

then, remove the spark plug wire(s) 

c. 

from the spark plug(s).

Keep all safety guards in place and in 

2. 

proper working order.  Safety guards 

include muffler, air cleaner, mechanical 

guards, and heat shields, among other 
guards.

do not alter or adjust any part of 

3. 

the engine that is sealed by the 
manufacturer or distributor.

Wear ANSI-approved safety goggles, 

4. 

heavy-duty work gloves, and dust mask/
respirator during service.

Maintain labels and nameplates on 

5. 

the engine.  These carry important 
information.  If unreadable or missing, 
contact Harbor Freight Tools for a 
replacement.

Have the engine serviced by a qualified 

6. 

repair person using only identical 
replacement parts.  This will ensure that 
the safety of the engine is maintained.  
Do not attempt any service or 
maintenance procedures not explained 
in this manual or any procedures that 
you are uncertain about your ability to 
perform safely or correctly.   

tHe enGIne BraKe Is For 
eMerGencY sHutoFF; do not 
rePLace tHe BraKe sPrInG wItH 
a weaKer sPrInG.

Store engine out of the reach of children.

7. 

Follow scheduled maintenance.

8. 

Refueling Precautions:

9. 

Do not smoke, or allow sparks, flames, 

a. 

or other sources of ignition around the 
engine, especially when refuelling.

Do not refill the fuel tank while the 

b. 

engine is running or hot.

Do not fill fuel tank to the top.  Leave 

c. 

a little room for the fuel to expand as 
needed.
Refuel in a well-ventilated area only.

d. 

 save tHese 

InstructIons.

Содержание 96156




















Отзывы: