Basic functions
Power: ON/OFF
Record: Start/Stop recording; confirm menu selection
Play: Switch between Record/Browse Mode; wakeup from
LCD display off
Menu: Enter built-in configurations under each mode
Left: Select menu or file
Right: Select menu or file
A. Recorder ON/OFF
1. ON: Press Power
2. OFF: Press Power for 3s, system will shut down after
LCD displays OFF frame
B. Cycled Mode
1. Normal recording
Set “Looping” at OFF (see Configuration) and press Record,
the machine will start recording and signal light will blink
(blue), LCD will display recording time and icon. Press
Record again to stop recording, signal light will stop
blinking and file is stored automatically.
2. Cycled recording
Set “Cycle” at ON (see Configuration) and press Record,
the machine will record under cycle mode and signal light
will blink (blue), LCD will display recording time and icon.
Press Record again to stop recording, signal light will stop
blinking and file is stored automatically.
Note: Cycle circulates by file size, each file is about 270BM.
When file reaches 270MB, the machine will stop recording,
automatically store file and begin the next recording. If
memory card is full, it will delete the first file and continue
to record.
C. Browse Mode
Under Record Mode, press Play to enter Browse Mode. Use
left and right keys to browse and select file, and then press
Record to replay. Press Record to pause and again to resume.
To exit Browse Mode, press Play again.
D. Delete Mode
Under Record Mode, press Play to enter Browse Mode, and
then press Menu to enter Delete Mode. Use Play to select
Delete All or Delete File, and then press Record to confirm
deletion. Press Play to exit.
E. Configuration Mode
Under record Mode, press Menu to enter configuration
Mode. Press Play to select menu to be configured, use
Left/Right to select sub-menu, then press Record to confirm
configuration. Press Menu to exit.
Resolution: Full HD/720P60/720P30
Audio: ON/OFF
Cycled: ON/OFF
EV: -2/-1.5/-1.0/-0.5/0/0.5/1.0/1.5/2
Date Stamp: ON/OFF
Format: YES/NO
Date/Time: Date configuration
LCD Screen off: 1min/OFF
Frequency: 50HZ/60HZ
Language: English/
繁體中文
/Frangais/Deutsch/Italiano
Default configuration: YES/NO
TV Output: PAL/NTSC
Version support: Version number/upgrade
F. Play files on TV
Connect one end of AV wire to audio and video input of TV
and the other end to AV output of the machine. Turn TV to
AV Mode. LCD screen will shut down and all functions are
displayed on TV.
G. Connect to PC
Under ON/OFF status, use USB line to connect PC and the
machine. Open “My Computer” to display a removable disk
drive. Removable Disk Drive
→
“DCIM” folder
→
“100MEDIA” folder to see all recorded files and to
download the files onto your PC.
Quick Guide
Any alterations on specifications will not be notified.
For updates, please visit http://www.grenzel.com
Resolution
Audio
OFF
OFF
OFF
ON
ON
ON
Cycled
EV
Date Stamp
Format
Date/Time
LCD
Screen Off
Language
LCD
Screen Off
Frequency
Default
TV Output
Version
Config.
ON
ON
YES
YES
NO
NO
dd/mm/yy
h/min/s
Version
No.
Upgrade
Battery
Improper use of batteries may cause fire and even
chemical burns. Please follow the cautions below.
Do not disassemble
Do not put pressure on battery. Do not let battery be
hit, fall, stepped on or vibrate
Do not allow short circuit of battery or let metal
contact battery terminal
Do not place at location over 60
℃
, e.g. under direct
sunlight or in car under the sun
Do not burn or dispose in fire
Do not use damaged or leaking lithium-ion battery
Please use the original packing charger
Please place battery out of children’s reach
Please keep battery dry
Charger
Charger is connected to AC power when plugged, even if
the signal light in not on. In case any problem shall occur
during use, unplug charger immediately.
Note: To maintain normal function of product, please use
accessories from original packing, e.g. battery, charger,
USB cable, AV cable
