GREMO 1250F, Руководство по ремонту

Страница: 53 / 206

Gremo 1250F/1450F Workshop manual 3 Service, maintenance and technical
information
3.1 Safety rules during service
3 Service, maintenance and technical
information
3.1 Safety rules during service
NOTICE
Read all signs and instructions on the machine and in
the safety regulations in the Instruction Manual before
you start servicing the machine.
Each of these contains important information about
handling and service.
Servicing which is not done correctly can present risks.
Make sure that you have enough knowledge, the correct
information, the correct tools and the correct equipment in
order to be able to carry out the service correctly. Repair or
replace broken tools or broken equipment.
You are not allowed to service the machine unless you
have the correct knowledge to do the work.
When you handle oil or fuel you should take measures to
avoid waste. Oil which is dumped on the ground will cause
damage to the environment and may also cause fire. Used
oils and fluids should always be taken care of by an
authorised company.
If you plan to install a comms radio, mobile phone or
similar equipment then the installation must be done
professionally in order to eliminate interference with
certain electronic components controlling the machine.
NOTICE
Always switch off the engine during service.
WARNING
Risk of serious crushing injury or fatal accident!
Always switch off the engine before releasing the cab to
tip it up.
Never go under a tipped-up cab unless it is propped up.
Ensure that the cab is propped up if you need to go
under it!
49