GreenWorks TMF301, Руководство оператора, Страница: 7 / 21

1. Open the battery door (14).
2. Push and hold the battery release button (13).
3. Remove the battery pack (11) from the machine.
3 MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
3.1 REPLACE THE PROPELLER
WARNING
Remove the battery pack before any replacement or
maintenance.
1. Hold the propeller (8) tightly.
2. Loosen the prop nut (15) with a wrench.
3. Remove the prop nut (15) and washer (16).
4. Replace with a new propeller.
WARNING
Make sure you align the slot (17) of the propeller with
the dirve pin (18).
5. Reinstall the prop nut and washer.
CAUTION
Tighten the prop nut 1/4 turn past snug (25 - 35 in lbs.).
Don't overtighten the prop nut, it may cause damage to
the prop or cause too much pressure/strain on the motor
which may cause overheating or premature battery
drain.
3.2 STORE THE MACHINE
WARNING
Make sure that the electrical parts are dry.
WARNING
Make sure that children cannot come near the machine.
• Make sure the battery is removed.
• Clean housing and the plastic components with a moist
and soft cloth.
• Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
• replace the damaged parts.
• tighten the bolts or nuts.
• speak to an authorized service center.
• Keep the propeller free of weeds and fishing line.
• Keep the leading edge of the blades smooth. If there are
nicks or rough edges, it is suggested to correct by using a
smooth file or fine sandpaper.
4 TROUBLESHOOTING
PROBLEM POSSIBLE
CAUSE SOLUTION
Motor fails to run
or lacks power. There are obstruc-
tions. The motor may
have gone into
current limit. Turn
the machine off,
remove obstruc-
tions and restart
the machine.
You do not install
the battery pack
correctly. Check battery con-
nections for proper
polarity.
The terminals are
not clean. Use a fine sandpa-
per or emery cloth
to clean the termi-
nals.
Motor looses pow-
er after a short
running time. The battery pack is
out of power. Charge the battery
pack fully.
6
English
EN