GreenWorks GPW2000-1RB, Руководство оператора, Страница: 12 / 29

4. The machine will suck detergent automatically when you
use the spray gun.
NOTE
Do not let detergent dry on the surface to prevent streaks.
5 MAINTENANCE
WARNING
Before maintenance, make sure that you
• Stop the machine.
• Wait until all the moving parts stop.
• Disconnect the plug from the power source.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
WARNING
Replace the power cord by an approved service center.
5.1 NOZZLE MAINTENANCE
23
11
If there is too much pump pressure, the nozzle can become
clogged, you can feel a pulsing sensation while you pull the
gun trigger.
5.1.1 REMOVE THE NOZZLE
1. Pull back the quick-connect collar (21) on the spray gun
wand (4).
2. Remove the nozzle (11) from the spray gun wand (4).
5.1.2 CLEAN THE NOZZLE
1. Use a straight paper clip or cleaning tool (23) to clean the
spray tip (11).
2. Flush and clean the unwanted materials out of the nozzle
(11) with the garden hose (18).
3. Install the clean nozzle (11) onto the spray wand (4).
6 TRANSPORTATION AND
STORAGE
WARNING
Disconnect the power cord and watter supply hose before
transportation and storage.
6.1 MOVE THE MACHINE
• Point the spray wand in a safe direction.
• Only hold the machine with the handgrip.
6.2 STORE THE MACHINE
WARNING
Make sure that the spray gun, the high pressure hose and the
pump are dry.
WARNING
Make sure the machine is out of the reach of children.
NOTE
Use a recommended pump protector to prevent cold
weather damage during storage in winter.
• Disconnect the garden hose from machine.
• Wind the power cord and the high pressure hose.
• Clean housing and the plastic components with a moist
and soft cloth.
• Make sure that the machine does not have loose or
damaged parts. If it is necessary, follow these steps/
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• If needed, call the customer service phone number
(enter number here) for servicing instructions.
• Store the machine in a dry, isolated and frost-free area.
11
English
EN