2. Pull the gate release button to disengage the gate.
3. Hold the gate open.
4. Push the "wedged" end clip of the mulcher tube into
the rear clip.
5. Pull and hold the gate release button.
6. push the “hooked” end of the mulcher tube into the
front clip.
TIP
You can do the steps above in the opposite sequence
to remove the mulcher tubes.
7. Put the bag adaptor into the blower outlet. Lock the
bag adaptor with the lock button.
0
NOTE
It can be necessary to remove the blower tube or
mulcher tubes to clean a blocked tube or impeller.
8.3
ASSEMBLE AS A BLOWER
1. Move the tube until the lock button engages into the
slot.
2. Put the concentrator nozzle into the blower tube to
lock.
5
English
EN