GreenWorks 48T15, Руководство пользователя

Страница: 11 / 14

4. Put the lines in the guide slots (23).
23
23
5. Do not wind the lines beyond the edge of the spool.
10.5 REPLACE THE BUMP KNOB
1. Push the tabs on the sides of the trimmer head at the same
time.
2. Pull and remove the spool cover.
3. Remove the spool.
4. Hold the bump knob (25) and pry it out with a metal rod
(26) (not provided).
5. Put the new bump knob into the spool housing.
25
26
11 TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before
tranportation and storage.
11.1 STORE THE MACHINE
• Remove the battery pack from the machine.
• Make sure that children cannot come near the machine.
• Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12 TROUBLESHOOTING
Problem Possible Cause Solution
The ma-
chine does
not start
when you
push the
trigger. No electrical con-
tact between the
machine and the
battery pack. 1. Remove battery pack.
2. Check contact and in-
stall the battery pack
again.
The battery pack is
depleted. Charge the battery pack.
The lock-out but-
ton and trigger are
not pushed at the
same time. 1. Pull the lock-out but-
ton and hold it.
2. Pull the trigger to start
the machine.
11
English
EN