7.1
START THE MACHINE
Figure 3
1. Push the on/off button to turn the machine on.
NOTE
Press and hold the power booster button for max suction
power and two indicators will be on.
7.2
STOP THE MACHINE
1. Release the ON/OFF button.
8
MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
8.1
EMPTY THE LITTER
Figure 4-7
The dust container must be emptied when it’s full. Every now
and then the dust container and the filter need to be cleaned to
maintain a high suction power.
1. Push the release button to remove the dust container.
2. Remove the filter guard together with the filter from the
dust container.
3. Turn counterclockwise the filter to seperate the filter and
filter guard.
4. Empty the dust container and filter contents into the a
waste basket.
8.2
CLEAN THE FILTER
NOTE
Allow the filter to dry before you store or picking up debris.
Often clean your filter to maintain peak vac performance.
Clean a dry filter:
•
Cleaning should be done outdoors and not in the living
quarters.
•
You can use a small brush to clean the dust and debris.
•
For thorough cleaning of dry filter with fine dust (no
debris), run water through it as described under "Cleaning
A Wet Filter"
Clean a wet filter:
1. Remove the filter from the machine.
2. Run water through the filter from a hose or spigot.
NOTE
Check the filter for tears or small holes after cleaning. Do
not use a filter with holes or tears in it. Even a small hole
can allow dust to come out of your machine. Replace it
immediately.
9
STORE THE MACHINE
NOTE
Clean the machine before storage.
1. Remove the battery pack.
2. Let the motor cool.
3. Check that there are no loose or damaged components. If
it is necessary, replace the damaged components, tighten
screws and bolts, or speak to a person of an approved
service center.
4. Store the machine in a cool and dry location.
10
TROUBLESHOOTING
Problem
Possible cause
Solution
The machine
doesn't work.
The switch or mo-
tor is defective.
Speak to service
center.
Dust discharges
from exhaust.
The filter has dam-
age.
Replace the filter.
The filter isn't in-
stalled.
Properly reinstall
the filter.
The filter is not
functional.
Clean or replace
the filter.
The filter clogs.
Clean or replace
the filter.
Loss of suction
The hose connec-
tion loose.
Tighten the hose
connection.
The filter clogs.
Clean or replace
the filter.
The collection
tank is full.
Empty the collec-
tion tank.
The hose has dam-
age.
Replace the hose.
Static shock
The environment
is dry.
Add moisture to
air (if practical,
use a humidifier).
7
English
EN
Содержание 4700007AU
Страница 1: ...VUG301 1 2 3 4 5 6 7 8 1 2 1 2 3 5 4 6 7 8...