background image

OPERATING TIPS

W A R N I N G

If the Snow Thrower hits a foreign object while it is in use, the object could be thrown in the 

direction of the operator or a bystander. Thrown objects could cause serious personal injury. 

Keep the area to be cleared free of all foreign objects that may be picked up and thrown by the 

impeller.

• Keep the area of operation free of foreign objects that can become thrown by the impeller. 

Perform a thorough inspection of the area since some objects may be hidden from view by 

surrounding snow. lf the snow thrower hits an obstruction or picks up a foreign object during 

use, stop the snow thrower, remove the battery, remove the obstruction, and inspect the unit 

for damage. Repair or replace any damaged part before restarting and operating the unit.

• 

Keep children, pets, and bystanders away from the area of operation. Be aware that the 

normal noise of the machine when turned on may make it difficult for you to hear approaching 

people.

• When moving the snow thrower, use the wheels on one side as the pivot point. Slightly tilt the 

snow thrower on this pivot point to move it forward or backward.

• 

Start your clearing path outward, throwing snow in a back and forth motion. To clear in the 

opposite direction, pivot the snow thrower on its wheels. Make sure to overlap clearing paths.

• Note the wind direction. If possible, move in the same direction as the wind so that the snow 

is not thrown against the wind (and thus back onto you and on the just cleared path).

• Do not push the snow thrower with excessive force. You should push the machine gently and 

at a consistent speed in accordance with the unit's throw rate.

• 

Some parts of the snow thrower may freeze under extreme temperature conditions. Do not 

attempt to operate the snow thrower with frozen parts. if the parts freeze while the snow 

thrower is in use, stop the snow thrower, remove the battery, and inspect for frozen parts. 

Free all parts before restarting or operating the snow thrower. Never force controls that have 

frozen.

• When working on pebbles, gravel, or unpaved surfaces, avoid throwing loose surface material 

along with the snow by pushing down on the handle to raise the scraper at the base of the unit 

above the pebbles or gravel.

• 

Cold Weather Operation: Lithium ion batteries can be safely used from temperatures ranging 

from -20 degrees to 45 degrees Celsius. nOTE: Do not store or charge battery outside. 

Battery must be charged and stored indoors prior to use of the snow thrower.

• If the Snow thrower does not start initially remove battery from snow thrower. Place battery on 

charger and allow to charge for 10 minutes. Remove from charger and install in Snowthrower 

for use. The start-up issue may be caused from the battery being too cold. To avoid this issue, 

ensure battery is stored in a dry cool place for storage and charging and leave indoors until 

ready for use. 

OPERATinG inSTRUCTiOnS

18

Содержание 26272






























Отзывы: