GreenWorks 25222, Руководство пользователя, Страница: 11 / 38

CHARGING PROCEDURE
Note: The battery can be charged in or out of the mower.
The charger that is supplied with this mower is a specially designed 2-stage charger.
Step 1: The red light will light up during the recharge cycle.
Step 2: The green light will light up when the battery is fully charged.
1. Remove the jack cover.
2. Plug the charger connector into the jack on the battery.
3. Insert the 120 V plug from the charger into the electrical outlet.
4. The red light on the charger should come on, which indicates that the charger is working
and the battery is being charged.
The red light will go out and the green light will come on when the battery is completely
charged (it takes approximately 15 hours to charge a fully discharged battery).
5. Battery should be charged after each use regardless of power level. Battery should
always be stored in a fully charged state. This battery will not develop a charging memory.
W A R N I N G
Do not store battery in temperatures lower than 32° F (0° C).
BATTERY & CHARGER
11 11
INSTALLING BATTERY/
INSTALACIÓN DE LAS BATERÍAS
Push battery down to engage.
Presione la batería hacia abajo para
que entre.
Tilt handle back to lock
into position.
Incline la manija hacia
abajo para asegurarla en
su sitio.
REMOVING BATTERY / RETIRO DE LA BATERÍA
CHARGING BATTERY
CARGA DE LA BATERÍA
Tilt handle forward to unlock.
Incline la manija hacia adelante para
desbloquear.
Lift battery.
Levante la batería.
Plug charger output into battery input.
Conecte la salida del cargador en la
entrada de la batería.
Plug charger into wall receptacle outlet.
Conecte el cargador en el tomacorriente
de la pared.