9
ASSEMBLY INSTRUCTION
BATTERY
IMPORTANT!
The battery pack is not charged when it is purchased. Before using the hedger
safety precautions, and follow the instructions in the Battery Charger section.
W A R N I N G
•
Replace the battery pack or the charger immediately if the battery case or charger cord is
damaged.
•
Verify that the switch is in the OFF position before inserting or removing the battery pack.
•
Verify that the battery pack is removed and the switch is in the OFF position before
inspecting, adjusting, or performing maintenance on any part of the hedger.
•
Read, understand, and follow the instructions contained in the section entitled Charging
Procedure.
To remove the battery
(See Figure 2.)
:
1. Slide the latch button on the battery pack down (1) and hold.
NOTE:
The batte
a strong pull to remove.
To install the battery
(See Figure 2.)
:
1. Align the rail (3) of the battery pack with the cavity in the handle housing.
3. Push the battery pack into the handle until the latch locks into place.
Fig. 2
IMPORTANT!
DO NOT remove the blade assembly unless it needs sharpening, straightening, or
1
2
3
