GreenWorks 22032, Руководство пользователя

Страница: 10 / 22

10
ASSEMBLY
BATTERY
IMPORTANT! The battery pack is not charged when it is purchased. Before using the hedge
trimmer for the first time, place the battery pack in the battery charger and charge for 24 hours.
Make sure to read all safety precautions, and follow the instructions in the Battery Charger
section. With regular use, it will need shorter charging time. If storing for a prolonged period of
time, remove the battery. When ready to use again, charge the battery pack for at least 24 hours
again. Nickel-cadmium batteries can develop a memory for usages and storage time.
To remove (See Figure 2.)
1. Press the battery release button found at rear of battery.
2.
Grasp the trigger handle (2) firmly. Pull the battery pack out of the handle.
To install (See Figure 2.)
NOTE:
The battery pack fits snugly into the handle to prevent accidental dislodging. It may require
a strong pull to remove.
Fig. 2
1
2
3
1. Align the tongue (3) of the battery pack with the cavity in the handle housing.
2.
Grasp the handle (2) firmly.
3. Push the battery pack into the handle until the battery release latch (1) has engaged and
locked.
4. Do not use force when inserting the battery pack. It should slide into place and click.
BLADE
IMPORTANT! DO NOT remove the blade assembly unless it needs sharpening, straightening, or
replacing. Take it to a qualified person for repair.