GreenWorks 20612, Руководство пользователя, Страница: 20 / 36

20
BATTERY CHARGING PROCEDURE (See Figure 12)
W A R N I N G
If any part of the charger is missing or damaged, do not operate it until the part is repaired or
replaced. Failure to heed this warning could result in possible serious injury.
NOTE: The battery is not shipped fully charged. It is recommended to fully charge before first use to ensure
that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be
charged at any time. A fully discharged battery pack will require approximately 4.5 hours to fully charge.
•
Plug the charger into an AC wall outlet/receptacle.
•
The RED LED power indicator (1) will illuminate.
•
Insert the battery into the charger. Verify that the battery is fully inserted into the charger.
•
The RED LED indicator (3) will illuminate indicating that the battery is in CHARGE MODE.
•
Once the battery has reached a full charge level, the LED indicator (3) will switch from RED to
GREEN.
•
The battery may be removed or stored in the charger once it is fully charged; however, it is
recommended to disconnect the plug from the wall outlet/receptacle.
NOTE: Lithium-ion batteries while in use will continue to provide full power without power fade unlike typical
batteries; when the battery is fully discharged the battery circuitry will immediately cut power to the tool and
require immediate charging.
BATTERY & CHARGER
Fig. 12
1
2
3