15
INSTALLING THE BATTERY PACK
Align the tongue (3) of the battery pack with the cavity.
Push the battery pack into the handle until the latch locks into place.
Do not use force when inserting the battery pack. It should slide into position and “click”.
W A R N I N G
J ' iately if the battery case or charger cord is
'
Verify that the switch is in the OFF position befo ' '
V switch is in the OFF position before inspecting,
&' 'rt of the chain saw.
J ontained in the section entitled Charging
Procedure.
I M P O R T A N T
% Qn
shut off the power to the tool and then reset itself once cooled.
Follow these steps if an overload occurs while under heavy use:
[J depressing switch.
2. % [
reinstalled for use.
Fig. 7
1
2
3
OPEJATING YO\JHAIN SAW
STARTING AND STOPPING THE CHAIN SAW
(See Figure 8)
W A R N I N G
Keep body to the left of the chain line. Never straddle the saw or chain, or lean over past the
chain line.
