GreenWorks Pro PW18HYB, Руководство оператора

Страница: 14 / 40

5.4 ADD DETERGENT
WARNING
Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
WARNING
Read the instructions on the solution bottle to prepare
detergent.
NOTE
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
the tank.
NOTE
Soap/detergent can only be applied with this machine when
the black nozzle(75 degree) is installed.
1. Place the pressure washer upright on a flat surface.
2. Open the cap on the detergent tank (8).
3. Pour detergent into tank (8).
4. Reinstall cap.
NOTE
Do not let detergent dry on the surface to prevent streaks.
5.5 START THE MACHINE
CAUTION
Do not operate without the water supply connected.
CAUTION
Before you start the machine:
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water come into view, release the
spray gun trigger.
1. Connect the machine to the power supply, and set the
power switch to the "AC" position;
2. Or place the battery packs in the battery compartments,
and set the power switch to the "DC" position.
3. Pull the spray gun trigger.
5.6 USE THE MACHINE IN SIPHON
MODE
If the machine is used in siphon mode, do the below
instructions:
NOTE
The pressure washer can absorb water from water buckets
and containers and from flushing or stagnant bodies of
water.
1. Detach the high pressure hose from the gun.
2. Start the machine.
3. If a stable stream of water comes out from the high
pressure hose, stop the machine.
4. Reinstall the spray gun.
5. Pull the gun trigger to release air pressure.
6. Start the machine.
5.7 STOP THE MACHINE
1. Release the gun trigger.
2. Set the power switch to the "OFF" (O) position.
14
English
EN
The vertical height of
the siphon hose can’t
exceed 4-ft.
NOTE
Exhaust the siphon hose for 30 seconds before installing
the spray tip when using the siphon function.