GreenWave BARAJAS, Руководство по эксплуатации

Страница: 3 / 12

ENG 3
GETTING STARTED
• Open the battery compartment of the mouse, remove the nano-receiver, insert
two AAA batteres into the compartment with the correct polarity and close the
battery cover.
CONNECTION
• Connect the nano-receiver to an available USB port of your computer. The
distance between the mouse and nano-receiver should be no more than 10 m.
• At the first connection wait until the drivers automatically installed.
• Put the power switch into ON position on the bottom surface of the mouse.
• To activate the mouse, just click any button of the mouse or scroll the scroll
wheel. If everything is connected correctly, the mouse automatically turns on.
Note: this product is classified as "Plug & Play" , so there is no need to install
special drivers or additional software for it.
OPERATION
Operation is subject to the following rules:
- do not use the device near heaters or other heat sources;
- use only the accessories specified by the manufacturer;
- clean only with a dry cloth or special napkins.
Treat the device carefully, because falls, shocks, exposure to moisture can
damage them or lead to malfunction.
Do not attempt to disassemble, open, repair or modify the device by yourself.
This can lead to negative consequences. Keep small parts out of reach of children.
The device is designed for indoor use. It is not intended for use with industrial
equipment, as well as medical or industrial facilities. Any changes to the device that
are not confirmed with the manufacturer, remove any responsibility for the
consequences of such actions from the manufacturer and seller. The device is
designed for use with digital equipment, is a commercial product and can be
operated in temperature range of +5...+40 °C and relative humidity of 80%.