16
PAGE
Common Faults and Disposing Method
Abnormal display on CDL external
radio:
E01 means the power supply voltage is
too high;
E02 means the power supply voltage is
too low;
E03 indicates that the configuration
parameters are missing.
LiBase station receiver restarts
repeatedly.
The differential light does not light up
after the base station is started.
When working in network 1+1 mode,
the "fixed" state of the mobile station
is unstable.
Other anomalies whose cause cannot
be determined
When the voltage is too low, it must be
charged before use;
When the parameters are lost, you can
use the CRU software to reset them
through the serial port.
The battery power is low, it can be used
normally after charging.
Check whether the host registration code
has expired. If it has expired, please
contact the distributor to apply for the
registration code.
Check the local mobile phone signal
strength, if the signal is not good, you
can change to the built-in radio or exter-
nal radio mode to work.
Please contact one of the technicians of
GreenValley for processing.
Fault
Indication/Function
17
PAGE
06
Data Transmission
07
LiBase Receiver Registration
7.1 Expiration Reminder
If a permanent registration code for the receiver has not been entered or the
temporary registration code has expired, when the Bluetooth connection to
the receiver is successful, there will be a prompt message "RTK function
expired". After the expiration date, the receiver will not be able to operate.
7.2 Contact Sales
Check the SN code of the RTK receiver device and contact sales.
7.3 Device Registration
Click [Device] → [Registration Information] →
enter the registration code into the registra-
tion code box → click [Register] → restart the
receiver and the registration is complete. You
can also scan the QR code through this inter-
face to register.
The registration code is generally in the form
of a string or a two-dimensional code. The
string is a group of 10-digit characters, such as
2259639206-2544851768-1170751387.
