4
INSTALLATION INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time:
45 minutes (24 hours for adhesive to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, adhesive,
power drill with drill bit, measuring tape, level
1. Please remove the Top (B) from the Vanity (A). Place the Top (B) and Backsplash (C) face
down onto a scratch- free surface such as a foam sheet that came in the packaging.
2. Apply silicone adhesive (not included) to
the top edge of sink (D). With the help of
another adult, lower the sink onto the back
side of the stone top. Make sure the sink
over-flow hole is facing the front of stone top.
Be sure to align the sink well with the stone top
cut out allowing for equal stone overhang on the
front, back and sides of the ceramic sink (D).
Note:
To install the sink onto the top correctly,
ensure that the two "BACK" stamps on the sink
and the top are aligned on the same sides.
Use the glide lines marked on the sink and
bottom side of stone top to assist with sink
location.
2
1
BACK
D
B
2
2
BACK
BACK
Sink Lip
Top
BACK
BACK
1
1
1
2
3
3
BACK
FRONT
B
A
