12
ASSEMBLY INSTRUCTIONS (CONTINUED)
15. Place door pull (II) into predrilled hole on left
door (G), securing with two door pull screws.
Repeat for remaining door pull (II).
Hardware Used
II
Door Pull
x 2
15
II
G
H
16. Install the doors
I. Loosen the screws on the hinge arms and plates pre-attached on the walls (E and F).
II. Pick up left door (G) and attach it to left outer wall (E) by engaging both door hinges
simultaneously. Please follow the steps below to combine the door hinges together.
i. Extend both hinge arms on the left door (G) to open position.
ii. Insert the “J” hooks beneath the hinge arms into the lugs on mounting plates pre-attached on
left outer wall (E).
iii. Press lightly on the end of both hinge arms to engage the catch.
iv. To remove the hinge arms from the mounting plates, press gently in the release lever on the
back of hinge arms.
III. Once assembled, go back and fully tighten all screws.
IV. Repeat the same procedure to attach the other right door (H) at the opposite side.
V. Open and close the doors to make sure they are aligned and shut correctly. If necessary,
adjust the screws for a good fit.
16
Release lever
I/F
(i)
“J” hook
(ii)
(iii)
I
II
III
F
E
G
H
