13
(1)
Remove the two screws located on the inner/top edge of the rear handle.
(2)
Remove the handle cover.
(3)
Remove the two BPI Brush Plugs by grabbing
and lifting them up and out.
(4)
Replace with the new BPI Brush Plugs by
inserting them into their color-coordinated outlets until they are fully seated.
(5)
Replace the handle cover and screws.
Part Replacement - BPI Module Brushes
1
2
3
4
5
(6)
Reset the BPI Module Life by navigating the information menu to
the BPI Module screen and holding the information button until the life
remaining changes to 100%.
Note: To reset the BPI Module Life using Greentech Connect, navigate to the unit control
screen, select the PCO Cell section and reset the life remaining.
