GreenTech pureAir 500, Руководство пользователя

Страница: 4 / 8

4
Getting Started
Modes
1. Begin by removing the Unit and Power Adapter from the packaging.
2. Locate a suitable location to place your unit. (Ideal location is
an area of the room with good circulation, or near the source
of pollution.)
3. Plug the Power Adapter into a wall outlet and then plug the
other end into Power Port of your unit.
4. Press the Power Button to control to power of your unit.
NOTE: Your unit will start in Ionization Mode.
5. Press the Mode Button on the top of your unit to cycle through
Ionization Mode, Purifier Mode, and Burst Mode.
Ionization Mode (Idle Green Light)
Ionization Mode is your unit’s default mode. This mode is ideal for removing airborne
particulates such as smoke, pollen, and pet dander from your breathing space.
Purifier Mode (Idle Red Light)
Purifier Mode creates Activated Oxygen (O
3
) and Ionization for a powerful 30 minute cycle
before reverting back to Ionization Mode.
NOTE: Acticated Oxygen can cause temporary respiratory and eye irritation.
Keep room unoccupied when using Purifier Mode.
Burst Mode (Flashing Red Light)
Burst Mode repeats between 5 minutes of Purifier Mode and 25 minutes of Ionization Mode.