GreenTech ECOBUS, Руководство пользователя

Страница: 5 / 12

5
Installation
(Mobile - Buses, Service Vehicles)
1. Determine location for desired
placement of unit. Typically, the angled
grill should be pointed upward and
mounted as high on the wall as practical.
2. Make access available for 24VDC
connection (ignition lead if unit is only to
be on when vehicle’s engine is running).
If not, a switch (not included) will be
necessary between the electrical lead
from vehicle and power lead of ECOBUS.
3. Remove cover from unit (requires a
security TORX bit {T10} – not included).
4. Option – If utilizing the LED operation
indicator light, determine where the
light should be located and how to run
the line from the unit to that location.
Connect the LED Leads JST Connector to
the JST Connector from ECOBUS.
5. Make proper electrical connection.
Run LED line to its determined position
if using.
6. Remove protective film from sponge
adhesive back material and carefully
align and stick unit in place.
7. Securely mount ECOBUS using the three
screw openings in back of the unit.
8. Replace the unit cover.
STEP 7
STEP 3 & 8
STEP 4
STEP 5
STEP 1