Barrier Mower RI 60-80
29
Pins and bushes
All main pivot points are furnished with replaceable bushes. If there are any signs of
wear, these must be replaced. All bushes are available from GreenTec’s Parts
Department.
Storage
Before storing away, thoroughly wash the machine removing all traces of grass and dirt.
Great care must be taken when washing with high-pressure hoses, do not hold the water
jet close to the paintwork. Use steam cleaners with caution; be sure to remove all
detergents to avoid any discolouring or damage to paint. Grease all grease points until
fresh grease shows. It is important where possible to store undercover to protect against
rain and sunlight. Always ensure a firm level surface. Control levers must be wrapped
in plastic sheeting and taped over to keep dry.
Option
Joy stick and electrical equipment, which are NOT water tight, must be wrapped in
plastic to keep them dry. Or dismounted.
Remember regular maintenance will greatly increase the life
of the machine.
WARNING
Do not use grease containing Molybdenum disulphide on nylon bushes
and wear pads.
WARNING
Before you attempt to do any repairs, service, maintenance or
adjustment on your machine, ensure that the engine has stopped
and the key is removed. PTO is disengaged, hand brake secure and
the tool is firmly on the ground.
