4
|
GreenTec
|
Merkurvej 25
|
DK-6000 Kolding
|
Phone: +45 75 55 36 44
|
4. Mounting of saw blades:
Watch out for the sharp saw blades! Avoid cuts, always wear sturdy leather
gloves!
The tractor or skid steer loader must be switched off, the parking brake
applied, and the key must not be in the ignition switch!
•
Make sure that the saw shank does not touch the housing on the quadsaw. Place the blade's
dust disc on the saw shank bracket.
•
Place the saw blade on the bracket so that the teeth point downwards at the front of the
quadsaw.
•
Place the saw blade mounting washer on the bracket and mount
6 pcs. bolts.
•
Tighten the bolts:
Tightening: bolts (Saw blades LRS-serie)
LRS-serie:
Thread size:
Strength class:
Tightening torque:
LRS 1402-1602
M8
10.9
40 Nm
LRS 2002-2402
M10
10.9
81 Nm
•
Rotate the saw blade by hand, the blade should run smooth and effortlessly.
•
This procedure is performed for all saw blades.
The "housing"
of the quadsaw
Saw shank
Dust disc
