GreenTec 9990060L-25, Руководство пользователя

Страница: 34 / 66

BAR
R
IER
MOWER R
I 6
0
–
80
26
5.2 INSTRUCTIONS ON MOUNTING, CONNECTING AND
DISCONNECTING
(j)
When the RI barrier mower is fitted to the vehicle for the first time, it may in some cases be necessary to
make simple adjustments, especially in relation to stabilization.
Remember that when mounting and connecting with multi carrier other than
those produced or approved by GreenTec, it is every operator's own
responsibility to ensure that the vehicle and the assembled machine meet
the applicable requirements and relevant directives for this!
When installing with other manufacturers than GreenTec, a new risk
assessment of the equipment used must be submitted!
If an unapproved attachment tool and/or multi carrier is fitted, the basis for
risk assessment is void, and thereby the validity and guarantee of the
declaration of conformity!
5.2.1 PREPARATION OF VEHICLE AND OPERATOR
Before attachment tools and machines are put into use, it is important that the vehicle incl. the operator is
properly prepared. This must be done both to achieve maximum safety and to ensure optimal operation and
stability of the vehicle.
As an extra safety: safety glass/windows (polycarbonate), safety nets and/or other protective devices can be
fitted to the vehicle when it is used together with GreenTec's machines.
In general, the driver of the vehicle should always use safety equipment to reduce the risk of serious injuries
such as:
Eye protection: Net/visor (DIN/EN1731) and/or safety glasses (DIN/EN166)
Hearing protection (DIN/EN352), safety helmet (DIN/EN297), gloves og and visible work clothes.
If the vehicle does not have a cab, safety glasses/shields, hearing protection and a helmet MUST be used:
Bare skin should be protected with suitable thick clothing against possible plant debris that can hit the
driver of the vehicle. See section:
Personal safety equipment – page 5.
5.2.2 MOUNTING AND CONNECTING THE MACHINE (i)
Never use the attachment tool and multi carrier on an unstable or unsuitable
vehicle!
There must be no people or animals near the vehicle due to the risk of
collision and/or overturning!
Connection and assembly of the machine must only be carried out by
professionals who have knowledge and understanding of hydraulic systems,
in order to avoid pollution of the environment, leaks and contamination of the
closed hydraulic system!
Assembling and mounting the multi carrier and attachment tool on a vehicle
must take place on a level and safe surface.
Great care must always be taken when fastening the implement frame to the
vehicle!