UG5 Cable Lubrication System
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
Description
The Greenlee ULTRA GLIDER™ UG5 Cable Lubrication
System is intended to apply cable pulling lubricant
during cable installation. It consists of a pump unit,
lubricant applicators, and a dolly.
The pump unit of the UG511 has a 120 volt motor that
•
plugs into a 15 amp circuit.
The pump unit of the UG512 has a 12 volt motor that
•
is powered by an onboard rechargeable battery.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
UG511 Cable Lubrication System (120 VAC)
UG512 Cable Lubrication System (12 VDC)
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
ULTRA GLIDER is a trademark of Greenlee Textron Inc.
Teflon is a registered trademark of E. I. du Pont de Nemours and
Company.
KEEP THIS MANUAL
Table of Contents
Description .................................................................... 2
Safety
............................................................................ 2
Purpose of this Manual
................................................. 2
Important Safety Information
.....................................3–4
Specifications
................................................................ 5
Setup
..........................................................................
5–6
Attaching the Hose
.................................................... 5
Setting Up the Pump
................................................. 5
Priming the Pump
...................................................... 5
Selecting and Attaching Applicators
.........................
6
Operation ....................................................................... 7
Maintenance
.................................................................. 7
Cleanup
...................................................................... 7
Battery ....................................................................... 7
Spanish
.....................................................................
9–15
French ....................................................................
17–23
Illustrations .............................................................
25–26
Parts List
..................................................................... 27
Wiring Diagrams .....................................................
28–29