Might Mouser
®
Fishing Systems
Greenlee Tools, Inc.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
5
Operation
Loading Mighty Mouser Blow Gun
Note: Use only Greenlee 595 fish line.
1. Make approximately a 6 mm
(1/4") hole in the center of the
595 fish line.
2. Pull out at least 600 mm (24")
of fish line.
3. Put the fish line spool
into the canister.
4. Feed the fish line through
the round hole in the
drag line insert.
5. Thread the fish line
under the bar on the
drag line insert.
Blowing Line
1. Load the fish line into the canister. Refer to “Loading
Mighty Mouser Blow Gun.”
2. Insert hose couplings into the canister handle.
Clamp the hose coupling over the blower exhaust
nozzle securely.
3. Install the appropriate adapter cone on the canister
exhaust nozzle with the fish line inserted through the
cone.
Note: Install the 1' hose between the blow gun
and adapter when the unit is used in tight quarters.
Attach the hose to the blow gun with the clamp
provided.
4. Tie the fish line to the proper size piston loop.
5. Hang the blower from your shoulder by the carry
strap, place the piston in the conduit, and then
press the cone adapter squarely and firmly into the
conduit opening.
6. Turn the blower switch on. When the piston exits the
conduit, turn the power switch off.
ROUND HOLE
600 mm
(24")
BAR
6. Screw the line drag insert into the nose cone, and
screw the nose cone onto the canister handle
section.
LINE TIED
TO PISTON
PISTON
ADAPTER CONE
NOSE
CONE
LINE DRAG INSERT
FISH LINE
CANISTER
1' HOSE