manualshive.com logo in svg

Greenlee GATOR EK06AT, Инструкция по эксплуатации

Поделиться
Скачать
Greenlee GATOR EK06AT Скачать руководство пользователя страница 2

Greenlee Textron / Subsidiary of Textron Inc.

2

4455 Boeing Dr., Rockford, IL 61109-2988  815/397-7070

EK06AT and EK06ATC

Table of Contents

Description

The EK06AT and EK06ATC Battery-Powered Crimping
Tools are hand-held, self-contained dieless crimping
tools intended to crimp aluminum and copper connec-
tors onto electrical cable.

The EK06ATC has a rubber coated head.

Purpose

This instruction manual is intended to familiarize opera-
tors and maintenance personnel with the safe operation,
troubleshooting and repair procedures for the Greenlee
EK06AT and EK06ATC.

Keep this manual available to all personnel.

Replacement manuals are available upon request
at no charge.

 and 

 are registered trademarks

of Greenlee Textron.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any decals on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.

KEEP THIS MANUAL

Description ..................................................................... 2

Purpose .......................................................................... 2

Important Safety Information ...................................... 3-4

Identification ................................................................... 5

Location of Decals ......................................................... 6

Specifications ................................................................. 6

Operation .................................................................... 7-8

Periodic Pressure Relief Valve Check ........................... 9

Maintenance .................................................................. 9

Troubleshooting ........................................................... 10

Service

Disassembly .......................................................... 11

Assembly ............................................................... 12

Exploded Views ...................................................... 13-15

Parts List ................................................................. 16-18

Содержание GATOR EK06AT



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды