CSG85GL Cable Cutter
Greenlee Textron / Subsidiary of Textron Inc.
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815/397-7070
Note: Keep all decals clean and legible, and replace
when necessary.
Do not perform any service or maintenance other
than as described in this manual. Injury or damage
to the tool may result.
Failure to observe this precaution can result in
injury and property damage.
IMPORTANT SAFETY INFORMATION
Use all appropriate and applicable personal safety
equipment as required, such as safety shoes, hard
hat, and safety glasses. Follow all safety rules and
regulations for the job.
Failure to comply could result in personal injury or
property damage.
• Do not cut steel or ACSR. Cut only copper and
aluminum cable.
• This tool is not designed for continuous use.
After 30 to 40 cutting cycles, allow the tool to
cool for 15 minutes.
• Do not place the tool in a vise. The cable cutter
is designed for hand-held operation.
• Ensure that all bystanders are away from the
work area when operating the tool.
• Ensure that the work area is clean, dry,
uncluttered, and well-lit.
• Use this tool for the manufacturer’s intended
purpose only.
Failure to observe these precautions can result in
injury or property damage.
