HPD-T and HPD-HV Hydraulic Sign Post Drivers
Greenlee / A Textron Company
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
IMPORTANT SAFETY INFORMATION
Wear a hard hat when using this
tool.
Failure to observe this warning
could result in serious injury or
death.
Tool and accessory may be hot
during and after operation. Allow to
cool before handling, or handle with
heat-resistant gloves.
Contact with hot surfaces could
result in serious injury.
Electric shock hazard:
This tool is not insulated. When
using this unit near energized
electrical lines:
• Use only certified non-conductive
hoses and proper personal
protective equipment.
• Select and maintain the hydraulic
fluid to meet the minimum dielec-
tric standards required by your
safety department.
Failure to observe this warning
could result in severe injury or
death.
Do not reverse hydraulic flow. Operation with
hydraulic flow reversed can cause tool malfunc-
tion. Connect the supply (pressure) hose and
return (tank) hose to the proper ports.
Failure to observe this warning could result in
severe injury or death.
Do not change accessories, inspect, adjust or
clean tool when it is connected to a power source.
Accidental startup could result in serious injury or
death.
Serious injury could result if the operator does not
maintain control of the tool.
• Wear slip-proof gloves when operating this tool.
• Maintain a firm grip on the tool, using both
hands at all times.
• Do not lock the trigger in the power-ON position.
Operator cannot stop tool when the trigger is
locked.
Failure to observe these warnings could result in
severe injury or death.
Accumulator is charged with nitrogen under high
pressure. This pressure must be unloaded before
dismounting.
Failure to observe this warning could result in
severe injury or death.
Do not disconnect tool, hoses, or fittings while the
power source is running or if the hydraulic fluid is
hot. Hot hydraulic fluid could cause serious burns.
