H8508 Hydraulic Impact Wrench
Greenlee / A Textron Company
9
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Operation (cont’d)
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from
flying debris or hydraulic oil.
Tool and drill bit may be hot during
and after operation. Contact with hot
surfaces could result in serious
injury.
Do not reverse hydraulic flow. Operation with
hydraulic flow reversed can cause tool malfunction.
Connect the pressure (supply) hose and tank
(return) hose to the proper ports.
Failure to observe this warning could result in severe
injury or death.
• Wear protective gloves when handling, removing
and installing drill bits. Drill bits can cut even when
stationary.
• Inspect tool before use. Replace any worn,
damaged, or missing parts. A damaged or
improperly assembled tool can malfunction,
injuring nearby personnel.
• Inspect hydraulic hoses and couplings every
operating day. Repair or replace if leakage,
cracking, wear or damage is evident. Damaged
hoses or couplings can fail resulting in injury or
property damage.
• Use this tool for manufacturer’s intended purpose
only. Use other than that which is described in this
manual can result in injury or property damage.
• Make sure all bystanders are clear of the work
area when handling, starting and operating the
tool. Nearby personnel can be injured by flying or
falling debris or by flying parts in the event of a
tool malfunction.
• Use only impact style bits. Bits not designed for
impact applications can break and cause severe
injury.
• Use only sockets approved for impact use.
Accessories not designed for impact applications
can break and cause severe injury.
• Inspect drill bits and sockets before use. Discard
damaged bits and sockets. Damaged accessories
can break and cause severe injury.
• Keep all parts of the body away from rotating parts
when the tool is in operation. Contact with moving
parts can result in severe injury.
• Do not change accessories, inspect, adjust or
clean tool when it is connected to a power source.
Accidental start-up can result in serious injury.
• Maintain a firm grip on tool, using both hands at all
times. Serious injury can result if an operator does
not control the tool.
• Do not lock trigger in the power-ON position.
Operator can not stop tool when trigger is locked.
Failure to observe these warnings could result in
severe injury or death.
Electric shock hazard:
This tool is not insulated. When
using this unit near energized
electrical lines, use only certified
nonconductive hoses and proper
personal protective equipment.
Failure to observe this warning could
result in severe injury or death.
