Chain Saws
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
13
Operation
Electric shock hazard:
This tool is not insulated. When
using this unit near energized electri-
cal lines, use only certified non-con-
ductive hoses and proper personal
protective equipment.
Failure to observe this warning could
result in severe injury or death.
Skin injection hazard:
Oil under pressure easily punctures
skin causing serious injury, gan-
grene or death. If you are injured by
escaping oil, seek medical attention
immediately.
Do not use fingers or hands to
check for leaks.
Do not hold hose or couplers while
the hydraulic system is pressurized.
Depressurize the hydraulic system
before servicing.
•
•
•
Saw body, bar, blade and other
components will be hot during and
after use. Use care when handling
the saw. Hot surfaces can cause
serious burns.
Failure to observe this warning could
result in severe injury or death.
Before operating the saw, read and
understand the following explana-
tions in this manual:
Pull-In
Pull-in can occur when the blade
at the bottom of the bar contacts
a foreign object, such as a nail,
or when the blade is pinched in
the cut.
The saw will be suddenly and
forcefully pulled away from the
operator.
Push-back
Push-back can occur when the
blade at the top of the bar con-
tacts a foreign object, such as a
nail, or when the blade is pinched
in the cut.
The saw will be suddenly and
forcefully pushed back toward the
operator.
Kickback
Kickback can occur when the
chain at the guide bar tip contacts
anything. The bar of the saw will
travel upward and back, toward
the operator.
Failure to observe this warning could
result in severe injury or death.
•
•
•
Wear a hard hat when using this tool.
Failure to observe this warning could
result in severe injury or death,
