background image

HG3555A/42306 Portable Power Unit

Greenlee Textron / Subsidiary of Textron Inc.

3

4455 Boeing Dr., Rockford, IL 61109-2988   815/397-7070

THIS SYMBOL MEANS:

ATTENTION!  BECOME ALERT!  YOUR SAFETY IS INVOLVED.

Do not disconnect tool, hoses, or fittings while
the power unit is running or if the hydraulic fluid is
hot. Exposure to hot hydraulic fluid can cause
serious burns.

Stop engine before filling fuel tank.
Do not fill fuel tank when engine is hot.
Do not fill fuel tank near an open flame,
sparks, or when smoking. Fuel is
flammable and explosive and, if ignited,
will result in severe injury or death.

Wear eye protection when operating
this tool.

Failure to wear eye protection can
result in serious eye injury from flying
debris or hydraulic oil.

Do not run the power unit engine in a confined
area. Engine exhaust fumes are toxic. If inhaled,
exhaust fumes can cause injury or death.

Electrical Shock Hazard:

When using this unit near energized
electrical lines, use only certified
non-conductive hoses and proper
personal protective equipment.

Failure to observe this warning could
result in severe injury or death.

Do not operate power unit without
safety guards in place.

Keep all parts of the body and
loose clothing away from the
engine fan.

Engine, exhaust system, pump, etc. may be hot.
Use caution when working around power unit.
Hot surfaces can cause serious burns.

Do not let the power unit engine run unattended.
The engine must be monitored so that it can be
shut down immediately in case of a malfunction.

Failure to observe this warning could result in
severe injury or death.

Safety is a critical factor in the design of Fairmont equipment. The best program starts with a safety-
conscious operator. The information highlighted in this bulletin describes operating practices for the benefit
of the workers who will use our equipment in their daily jobs. Comments from users are appreciated.

SAVE THESE INSTRUCTIONS

Skin Injection Hazard:

High pressure oil easily punctures skin
causing serious injury, gangrene or
death. If injured seek medical help
immediately to remove oil.

Do not use fingers or hands to
check for leaks.

Depressurize hydraulic system
before servicing.

Содержание Fairmont 42306























Отзывы: