Greenlee 950-M3 Скачать руководство пользователя страница 3

3

4455 Boeing Dr., Rockford, IL 61109-2988    815/397-7070

Greenlee Textron / Subsidiary of Textron

 950-M3 Basic Hydraulic Power Pump

SAVE THESE INSTRUCTIONS

Additional copies of this manual are available upon request at no charge.

• Inspect pump, hoses, couplers and fittings for

wear or damage. Replace worn, damaged or
missing components with Greenlee replacement
parts.

• Do not twist, kink, curl, paint or cut the

hydraulic hoses.

• Wear eye protection when operating this

equipment.

• Disconnect the pump from the power supply,

rotate the release valve lever to AUTO RELEASE
and disconnect the hose from the ram and the
pump before performing any service.

Failure to observe these warnings could result in
severe injury or death.

Electric shock hazard:

• Do not expose power tools to rain.

• Do not immerse the pendant

switch in water or other liquid.

• Do not connect the pump to any system or

system component other than those supplied
by Greenlee and rated at less than 10,000 psi
(68,950 kPa).

• Do not alter the internal high-pressure relief

valve setting.

• Do not use this pump in a hazardous

environment. Hazards include open flame and
flammable liquids or gases.

Failure to observe these warnings will result in
severe injury or death.

Skin Injection Hazard:

High pressure oil easily punctures
skin causing serious injury, gangrene
or death. If injured seek medical help
immediately to remove oil.

Do not use fingers or hands to check
for leaks.

Depressurize hydraulic system
before disconnecting the hose.

• The pump is heavy, weighing up to 75 lbs.

Follow NIOSH work practices for manual lifting.
If in doubt, get help.

• Unplug pump when not in use and when chang-

ing accessories.

• Do not use the hose to pull, lift, or carry the

equipment.

• Always work in an area providing good footing

and support.

• Keep work area well-lit, free of clutter, and dry.

Failure to observe these precautions could result
in injury or property damage.

IMPORTANT SAFETY INSTRUCTIONS

Содержание 950-M3











Отзывы: