manualshive.com logo in svg

Greenlee 555BAT, Инструкция по эксплуатации

Поделиться
Скачать
Greenlee 555BAT Скачать руководство пользователя страница 11

Greenlee Textron / Subsidiary of Textron Inc.

11

4455 Boeing Dr., Rockford, IL 61109-2988  815/397-7070

555BAT™ Battery-Powered Bender

Preparation

Batteries can produce explosive
hydrogen gas.

• Use this bender in well-ventilated

areas.

• Do not allow metal or conductive

objects to contact the battery
terminals.

• Do not use this bender near an

open flame.

Failure to observe these warnings
will result in severe injury or death.

Do not attempt to charge a very cold or frozen
battery. Damage to the battery could result,
causing acid to spray out.

Failure to observe this warning can result in
severe injury or death.

Electric shock hazard:

• Do not modify the charger power

cord or plug.

• Inspect the charger power cord

before connecting to a power
source.

• Connect the charger power cord

to a 120V, 15-amp grounded
receptacle only.

Failure to observe these warnings
can result in severe injury or death.

Batteries contain acid. Wear rubber
gloves and face shield. Use insu-
lated tools when inspecting or
working with the batteries.

Failure to observe this warning can
result in severe injury.

1.

Place the bender on a firm level dry surface.

2.

Check the circuit breaker to be sure it is in the
OFF position.

3.

Remove the pins from the bender.

Removing the Pins

Содержание 555BAT

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды