13
GREENIS
POWER BLENDER
GREENIS
POWER BLENDER 14
Other important precautions
：
USE PRECAUTIONS
Stirring ingredient that is fermentative or dry (little water content) for a long time may cause
over-heating and thus trigger overheating protection mechanism built inside the motor. Therefore
please start with low speed and change to high speed if the ingredients are thick or rather dry. If it's
still difficult to stir, please shut down the power, reduce amount of ingredients or add liquid to
decrease viscosity.
The motor will stop working when overheated. Unplug the blender and cool down the motor for 45
minutes in a drafty place or in front of a fan.
During the operation, make sure the lid and measuring cup are fastened tightly, in case the food
inside would splash out and cause injuries.
During the operation, DO NOT put hand, any tool (like spoon), or other hard object into the blender
jar, in case of any danger or damage.
When making hot drinks (like soybean milk, rice paste, pottage, etc.), make sure the lid and measur-
ing cup are fastened tightly, and set the speed from low speed to high speed.
When making sauces (like almond paste, jam, peanut butter or sesame paste, etc.), stuffing, or shell
grains, the volume of ingredients must be among 3 cups to 5 cups; DO NOT operate continuously for
a long time, in case there will be scorched flavor because of overheating. Too many ingredients may
also cause overload, triggering motor’s over-temperature protection.
Please place liquid and soft ingredients first before hard ones like ice cubes.
DO NOT remove the jar until the blades come to a full stop. Otherwise it may cause damages to drive
socket.
Please stop the machine once smelling any scorching smell. It may be caused by overload of
ingredients or the fact blades and drive socket are not fully engaged.
It is recommended to operate the machine no more than 10 minutes at a time.
Please ensure the blender is unplugged before cleaning or maintenance.
Attention:
Warm Prompts:
Simple cleaning:
Attention: Do not immerse jar into water
1. Add 750 ml clean water and 1-2 lemon slices, tap button “ ” (running for 1 min 56s).
2. Pour away dirty water and repeat step no.1.
3. Pour away dirty water and wipe it clean with cloth. Dry the jar in a drafty place.
CLEANING & MAINTENANCE
Do not immerse motor base or power cords into water or any other liquid.
Use soft cloth or sponge to wipe clean the surface of jar. Remove the measuring cup and seal
ring before proceeding to cleaning.
Rinse the jar with clean water after each use. Or you can add 2 cups of clean water (1 L) into the
jar, secure the lid, and tap button “ ” to clean.
Lay down the jar horizontally in a drafty place or place it upside down to let it dry naturally. Do
not immerse it entirely in water.
Do not rinse motor base with clean water. Use soft cloth to clean instead.
When drying the machine by placing it in an upside-down position, please wipe away
leftover water at the bottom of the jar. Keep it away from the sink in case of any water
dripping into the bottom of the jar and potentially rusting interior key components like
metal bearing.
To thoroughly clean the inside of the jar and leftover dirt on the blades and ensure
durability of jar and blades, it is recommended to add some clean water and lemon into
jar, secure the lid and press button “PULSE” to quick clean for 2-3 times. Pour away
water and repeat the step.
