2) CLOCK SETTING INSTRUCTIONS
OPEN CLOCK
BEFORE INSERTING THE BATTERIES SET THE TIME TO 05:45 USING THE DIAL
ON THE BACK OF THE CLOCK MOVEMENT.
THEN INSTALL 2x AA BATTERIES INTO THE MUSIC BLOCK FIRST AND THEN
INSERT 1x AA BATTERY INTO THE CLOCK MOVEMENT MAKING SURE +/- IS
POSITIONED CORRECTLY.
ADJUST THE TIME CLOCKWISE TO THE LOCAL TIME (THE CORRECT HOURLY
CHIME WILL BE PLAYED WHILST SETTING THE TIME).
3) OTHER CLOCK INFORMATION.
HOURLY CHIME IS PRE-SET FROM 6am TO 9pm AND SILENT FROM 10pm to 5am.
IF SILENT MODE DOES NOT OPERATE CORRECTLY, PLEASE REMOVE THE
BATTERIES AND REPEAT THE SET UP INSTRUCTIONS CAREFULLY.
PRESS BLACK BUTTON TO TEST ALL THE BIRD SOUNDS.
4) THERMOMETER SETTING INFORMATION
PLEASE NOTE THAT THE THERMOMETER IS PRE SET AT THE FACTORY AND WHEN
RECEIVED IT SHOULD BE ACCURATELY SET FOR IMMEDIATE USE.
HOWEVER, IN THE UNLIKELY EVENT THE SETTINGS HAVE BEEN AFFECTED IN TRANSIT
PLEASE SEE BELOW THE PROCEDURE TO RESET THE TEMPERATURE:
OPEN THE CASING AND TURN THE PLASTIC THERMOMETER HOUSING TO RE ALIGN
THE POINTER TO THE CORRECT TEMPERATURE USING ANOTHER PRE-SET
THERMOMETER
(Note that when mounted outdoors the temperature displayed will vary considerably dependent on the
exact location of the clock in relation to direct sunlight and wind – a true indication of actual air
temperature will only be achieved if the clock is mounted in a shaded position away from drafts)
5) BATTERY INFORMATION.
1)
USE 3x AA 1.5V BATTERIES (NOT SUPPLIED)
2)
REMOVE EXHAUSTED BATTERIES
3)
DO NOT DISPOSE OF BATTERIES WITH HOUSEHOLD WASTE
6) SERVICE
Should you require further details or assistance, please contact our customer care line on
01562 753040
DY11 7FB
T
his product contains valuable materials which can be recovered or recycled
– please dispose of in accordance with your local council directives
