8) The height of the brackets can
be adjusted by loosening the nuts,
moving the bracket and then
re-tightening the nuts.
9) Open your lights and remove
the film from the reflectors.
10) Prise the dust cap off one of
the lights (at the output end).
11) Position the lights in the notches on
the brackets so that one light has the
Input facing you and the other light
has the Output facing you. Centre the
lights over the Vitopod.
12) Plug the power cord with on/off
switch into the input end of one of
the lights. Do not plug into a power
socket at this time.
13) Take the connecting cable. Click one
end of the connecting cable into the
Input of one light and click the other
end of the cable into the Output of
the other light.
14) Your lights can now be plugged into
a power socket and switched on.
This completes assembly of your
Vitopod lighting kit.
11)
12)
14)
8)
13)
Safety Notice
Store your lights in the house or a
warm dry place when not in use.