background image

8

463277 • NYD & NYB, Rev. 2, December 2008 

Copyright 2008 © Greenheck Fan Corp

®

Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: [email protected] • Website: www.greenheck.com

Greenheck warrants this equipment to be free from defects in material and workmanship for a period 
of one year from the purchase date. Any units or parts which prove defective during the warranty 
period will be replaced at our option when returned to our factory, transportation prepaid. Motors are 
warranted by the motor manufacturer for a period of one year. Should motors furnished by Greenheck 
prove defective during this period, they should be returned to the nearest authorized motor service 
station. Greenheck will not be responsible for any removal or installation costs.

As a result of our commitment to continuous improvement, Greenheck reserves the right to change 
specifications without notice.

Greenheck Catalog NYD & NYB provides additional information 

describing the equipment, fan performance, available accessories, 

and specification data.

Warranty

AMCA Publication 410-96, Safety Practices for Users and 

Installers of Industrial and Commercial Fans, provides additional 

safety information. This publication can be obtained from AMCA 

International, Inc. at: www.amca.org.

Parts List

NOTE: 

Each fan bears a manufacturer’s nameplate with model number and serial number embossed. This information 

will assist the local Greenheck representative and the factory in providing service and replacement parts. 

Before taking any corrective action, make certain unit is not capable of operation during repairs.

CAUTION: 

A fan manufactured with an explosion resistant motor does not certify the entire unit to be explosion proof.

NYD Direct Drive Centrifugal Roof Exhaust Fan

HOOD

WHEEL

SUPPORT FRAME

DRIVE FRAME

MOTOR

BIRDSCREEN

CURB CAP

WIRING CONDUIT

HOUSING

ISOLATORS

Содержание NYD









Отзывы: