The system design and installation should follow
accepted industry practice, such as described in the
ASHRAE Handbook and SMACNA.
Minimum service clearance should be provided on
the side of the unit for routine service and component
removal should it become necessary.
Before beginning installation see page 3 for detail on
appropriate service clearances.
Hang Mounting with Hanging Vibration
Isolators
• The hanging isolator kit includes four (4) isolators
and required hardware.
• The hanger mounting brackets are factory
mounted.
• Locate the support rods as shown in the drawing.
• Assemble each isolator as shown.
MiniVent
A
B
C
450
37
7
⁄
8
26
7
⁄
8
20
750
43
3
⁄
8
32
7
⁄
8
24
All dimensions are in inches.
Installation
Changing the discharge location
Step 1
-
remove the metal
cover for optional intake by
unfastening the four sheet
metal screws holding it in
place.
Remove the intake duct
collar by unfastening the
sheet metal screws holding
it in place.
Step 2 -
place the duct
collar over the newly
uncovered intake opening.
Fasten the intake duct
collar in place.
Place the metal cover over
the original intake and
fasten into place. Be sure
that the corner angle fits
correctly around the unit
corner.
Intake Cover
Intake Duct
Collar
Intake and Discharge Locations
Intake and discharge locations are shown. Both intake
locations are capable of being field relocated to suit
installation needs (see optional locations).
Exhaust Air
Discharge
Intake
Intake (optional)
Intake (optional
)
Discharge
Intake
Outdoor Air
Electrical and Fan Access Panel
(underside)
A
B
C
Flat Washer
Lock Washer
Nut
Nut
Flat Washer
Lock Washer
Hanger Bracket
(Factory Mounted)
Isolator
3/8 inch Threaded Rod
(Provided by Others)
Isolator Assembly
4
Energy Recovery Ventilators • MiniVent
®
