GRINDING AND SETTING
Brew Type
Ground Size
Cup Selection
Maximum
Grinding Time
French Press
Coarse
-12 Cups
55S(12Cup)
Drip Coffee Maker
Medium
-12 Cups
55S(12Cup)
Espresso
Fine
-2 Cups
(1 2Cup)
TROUBLESHOOTING
Problem
Grinder does
not work
Grinder stops
mid-cycle
Possible Cause
Solution
Plug power
Gently remove and re-install
bean hopper or chamber ensuring
it is seated properly.
Fill hopper with fresh coffee beans
Fill hopper with fresh coffee beans
Unplug power cord and remove hopper.
Clean grounds chute with brush.
Unplug power cord and remove hopper.
Inspect hopper, clean the burrs.
Remove any foreign objects.
Refer to Care and Cleaning section.
Grinder not plugged in
Bean hopper or chamber
not attached properly
Grinder overheated
No beans in hopper
Foreign item trapped in burrs
Grounds chute is clogged
Clean The Grinder
Warning:
Before cleaning, please make sure the grinder is unplug.
To avoid damage, do not immerse the main body, grinding burr or power cord in water or put it in
the dishwasher.
1
2
The Bean Hopper, Bean Hopper Lid, Grinding Chamber,
Grinding Chamber Lid, brush and spoon can be cleaned with
warm soapy water, then rinse with clean water and dry thoroughly.
Also you can clean them with the dishwasher.
Wipe the main body of Coffee Grinder with a soft
and damp cloth and dry it with a soft dry cloth.
CARE AND CLEANING
Cleaning The Burrs
Warning:
It is recommended to clean out the coffee bean hopper after every few uses for
keeping best grinding effect and best performance.
1
Empty the Bean Hopper.
Remove the lid and the Bean Hopper.
