NUT 018 Ed. 3.1
février
16
©
G
REENFIELD
T
ECHNOLOGY
6
GFT9404
User
Manual
2.
I
NSTALLING
AND
C
ONFIGURING
This chapter describes how to install the GFT9404
hardware and software and how to
configure the device.
Installing
the
Software
Refer to the readme.htm file on the GFT9404
CD for software installation directions.
Note :
be sure to install the driver software
before
installing the GFT9404
hardware.
The software includes a control application for using the board directly, as well as a library for
designing C/C++ applications and LabVIEW VIs.
This release of the GFT9404 control application supports Microsoft Windows XP SP2, Vista,
and Windows 7.
For application development, you need either a C/C++ compiler and an IDE such as Visual
Studio, or LabVIEW.
Installing
the
Hardware
The following information provides general installation instructions. Consult the chassis user
manual or technical reference manual for specific instructions and warnings about installing
new modules.
1. Power off and unplug the chassis.
2. Choose an available PXI or PXI hybrid slot in the chassis.
3. Remove the filler panel for the PXI slot you chose in step 2.
4. Ground yourself using a grounding strap or by touching a grounded object. Follow the ESD
protection precautions described in the
Unpacking
section of Chapter 1,
General information
.
5. Insert the GFT9404
into the PXI slot. Use the ejector handle to fully insert the module into
the chassis.
6. Screw the front panel of the device to the front panel mounting rail of the chassis.
7. Visually verify the installation. Make sure the module is not touching other modules or
components and is fully inserted into the slot.
8. Plug in and power on the chassis.
